Solar Pond Aerator with Air Pump
Pickup currently not available
JOVQELO
Add bubbles to your pond with sunlight
The solar panel powers a small air pump that sends bubbles through the air stone. Use it for daytime aeration in a sunny garden pond or water feature.

Powered directly by the sun
Set the 2.5 W solar panel where it receives strong, direct sunlight. The pump runs while the panel receives enough light. It stops after dark or when the panel is shaded.

Set it up in three steps
- Stake the solar panel in a sunny spot.
- Connect the air tube to the pump and air stone.
- Lower the air stone into the pond and keep the pump and panel above water.

Place the panel in the sun and the stone where you want bubbles
A 3 m power cable connects the panel to the pump. The 1.5 m air tube runs from the pump to the air stone, so you can position the parts separately.

A closer look at the pump
The compact pump sits above the waterline. The submerged air stone releases bubbles whenever the pump is running.

See the aerator by the pond

Specifications
- Solar panel 7 V / 2.5 W, 110 × 110 mm (4.3 × 4.3 in)
- Air pump 58 × 40 mm (2.3 × 1.6 in)
- Maximum airflow 0.8 L/min
- Power cable 3 m (9.8 ft)
- Air tube 1.5 m (4.9 ft)
- Color and materials Black, PET-laminated solar panel and plastic housing
What comes in one set
One solar panel, one air pump, one air stone, one 1.5 m air tube, two solar panel stakes, two air pump stakes and an English manual.
Before you set it up
Only the air stone and air tube go in the water. Keep the pump and solar panel above the waterline. Clear debris from around the air stone. This direct-drive model requires strong sunlight, so expect it to stop in low light.